Replacing NC7SZ126P5X with 74HC245D

[emir]

Hello,

I am working with a pmod i2s module from Digilent and according to their schematic they have a non-inverting buffer for SDOUT from ADC feeding into the MCU ADIN_SDOUT.



And I have been looking into its datasheet



In comparison to 74HC245D


I have implemented it this way in my schematic:


The logic table says this would be a correct way to pass data from A0 to B0.

Digilent SCH: https://digilent.com/reference/_media/reference/pmod/pmodi2s2/pmodi2s2_sch.pdf
NC7SZ126P5X Datashet: https://nl.mouser.com/datasheet/2/308/1/NC7SZ126_D-2316643.pdf
74HC245D Datasheet: https://datasheet.lcsc.com/lcsc/1811131630_Nexperia-74HC245D-653_C5625.pdf


Edit:
Looks like I forgot to ask my question when it was late writing this post.
I was wondering if my thinking is right and they would function the same way in this regard?

[Benta]

And the question is?

[emir]

And the question is?

Looks like I forgot that when it was that late. My excuses.
I was wondering if my thinking is right and they would function the same way in this regard?