Electronics > Beginners
Big current draw in simple timer circuit.
MarkusAnd:
The LEDs I use are the "normal" low powered LEDs you can buy as an assortment. According to the product description, they should be fed 20mA.
Zero999:
The transistor's gain is probably much higher than specified on the data sheet. Never rely on the hfe of a transistor to limit the current to an LED. You need a series resistor.
The current surge due to the capacitor is unavoidable. There are better ways of implementating a timer, such as the classic NE555.
Navigation
[0] Message Index
[*] Previous page
Go to full version