Author Topic: Bluetooth- MIT App Inventor and Arduino Code  (Read 5079 times)

0 Members and 1 Guest are viewing this topic.

Offline Brown

  • Contributor
  • Posts: 45
Bluetooth- MIT App Inventor and Arduino Code
« on: January 10, 2014, 08:39:14 pm »
So, I maked Bluetooth app with App inventer Link
and I found some Arduino code online and was wondering if it's correct thanks
---Arduino code---

// This program shown how to control arduino from PC Via Bluetooth
// Connect ...
// arduino>>bluetooth
// D11   >>>  Rx
// D10   >>>  Tx
//Written By Mohannad Rawashdeh
//for http://www.genotronex.com/

// you will need arduino 1.0.1 or higher to run this sketch

#include <SoftwareSerial.h>// import the serial library

SoftwareSerial Genotronex(10, 11); // RX, TX
int ledpin=13; // led on D13 will show blink on / off
int BluetoothData; // the data given from Computer

void setup() {
  // put your setup code here, to run once:
  Genotronex.begin(9600);
  Genotronex.println("Bluetooth On please press 1 or 0 blink LED ..");
  pinMode(ledpin,OUTPUT);
}

void loop() {
  // put your main code here, to run repeatedly:
       if (Genotronex.available()){
BluetoothData=Genotronex.read();
   if(BluetoothData=='1'){   // if number 1 pressed ....
   digitalWrite(ledpin,1);
   Genotronex.println("LED  On D13 ON ! ");
   }
  if (BluetoothData=='0'){// if number 0 pressed ....
  digitalWrite(ledpin,0);
   Genotronex.println("LED  On D13 Off ! ");
  }
}
delay(100);// prepare for next data ...
}
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf