EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: paulca on March 29, 2018, 11:44:01 am

Title: Breadboarding a castellated SMD daughter board
Post by: paulca on March 29, 2018, 11:44:01 am

So I bought myself one of these:
https://uk.rs-online.com/web/p/bluetooth-modules/8696218/

RN-25 Bluetooth 3.0 Audio module.

I am hoping on having a quick play with getting it running on a breadboard.

I noticed the castellated pins are only 1.2mm pitch.

I would assume my only real option is to solder breadboard jumper wires onto the pins I need and leave the rest floating.

Any tips?

Title: Re: Breadboarding a castellated SMD daughter board
Post by: Rerouter on March 29, 2018, 11:45:09 am

get a bit of veroboard, solder some pin headers to it, and break it out with mod wire,

Title: Re: Breadboarding a castellated SMD daughter board
Post by: paulca on March 29, 2018, 12:26:11 pm

Quote from: Rerouter on March 29, 2018, 11:45:09 am

get a bit of veroboard, solder some pin headers to it, and break it out with mod wire,

Nice idea.  Thanks.