Electronics > Beginners

BYV32E-200 vs BYV32E-200P

(1/1)

essence25:
Hello lads,

Question,

Are these the exact same parts, original BYV32E-200 vs the mouser.com one which has a "P" at the end. Eg. BYV32E-200P can the P one be used in place of the non P?

Thank you!

ArthurDent:
It looks like the 'P' version has an isolated mounted plate but the non P has the cathode connected to the mounting plate.

At https://www.digipart.com/part/BYV32E-200 scan down to the Arrow listing and click on the part numbers for more information.

george.b:

--- Quote from: essence25 on February 04, 2020, 01:15:55 am ---Does this indicate good part?

--- End quote ---

Yes.

ArthurDent:
The 'P' version should work fine with or without the pink insulator. The checker shows that the original parts is probably O.K..

essence25:
Ok, I received the new part with the P and it is exactly the same. Tab still tied to center pin. It appears to be a newer model and works fine in place of the old one. Even though the old one is not dead. :-)

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod