Electronics > Beginners
Cable removal
(1/1)
Hornnumb2:
How does the lvds cable get removed from this connector? Thanks
Doctorandus_P:
The brown, or the thick white is probably a piece of plastic inserted into the socket.
Insert a knife / screwdriver / other thin object - behind it and wiggle it alternating left & right in the direction of the Flex cable.

Normally these do not come out completely, but only a few mm. Then the Flex should be loose and pop out almost by itself.
Yaakov:
Be very gentle opening the latch, they are exceedingly easy to break—along with your heart when you do it.
Hornnumb2:
So the brown part should slide out towards cable. Right?
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod