Electronics > Beginners
Capacitor swap
(1/1)
Znfrlj:
Hi,
I am trying to fix a bad Samsung LCD power supply (running on AC 230V mains).
If I swap the bad 100uF 450V cap with a 100uF 400V I have at hand, it should be ok. Right?
The peak AC voltage should not exceed 325V +/- 15V.
Thanks!
Psi:
It should be ok just to test with. To see if that's the problem or not.
But once you fix it permanently i would replace with 450V
Znfrlj:
Ok, thanks!
Navigation
[0] Message Index
Go to full version