EEVblog Electronics Community Forum
Electronics => Beginners => Topic started by: Prog on August 06, 2016, 05:33:31 pm
-
Short Q:
Could be a problem if I've used CH341A v1.17 Programmer software that have in list only W25Q128BV (https://www.winbond.com/resource-files/w25q128bv_revh_100313_wo_automotive.pdf) instead of W25Q128FV (https://www.pjrc.com/teensy/W25Q128FV.pdf) the last one being my original Chip too?
According to the manuals (BV version page 71 Ordering information section and FV version page 97), 128B or 128F the same density 128M-bit, V=2.7..3.6V in both cases.
I don't see any difference, more than that, I have successfully writen / verified the Bios chip and get into the windows again but just want to be sure.
Any thoughts? thanks