EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: malium on September 15, 2013, 09:54:34 pm

Title: Clarification about step up modules/converters
Post by: malium on September 15, 2013, 09:54:34 pm

Hello,

just a quick one. DC step up converter based on LM2577, it trades of A for V, right? If I have 5A input to the converter, and boost from 3,7V to 12V, I am still gonna end with 0,5A on the output, no matter what?

Thanks!

Title: Re: Clarification about step up modules/converters
Post by: Dave on September 15, 2013, 09:59:51 pm

Think of power.
You have 3,7V * 5A = 18,5W going in. Your switching converter has a certain efficiency, for example 85%, so output power will be 18,5W * 0,85 = 15,7W. Your output voltage will be 12V, so your maximum output current will be 15,7W / 12V = 1,3A.

Title: Re: Clarification about step up modules/converters
Post by: malium on September 15, 2013, 10:04:44 pm

Dear neighbour from Slovenia, many, many thanks! I suspected that, but their datasheets confused me there for the moment :)

Thanks again!

Title: Re: Clarification about step up modules/converters
Post by: fcb on September 15, 2013, 10:05:01 pm

Vout * Iout * Efficiency = Vin * Iin

So if you are drawing 5A @ 3.7v you are using 18.5W (watts!), so at 12v (assuming 100% efficiency) your load is drawing 18.5/12 = 1.54A

Efficiency is more likely to be around 70-80%.

Also, it's more conventional to design for the output current rather than the input current.