Electronics > Beginners
Component identification -. 3 digit number with line over the top?
(1/1)
Andrew2007:
Hello

I've managed to cut through the cable of one of my CCTV camera's whilst trimming the ivy! 😩😲😠

There's a smd component on the main board that is broken on the end, at first I thought it was a resistor but I don't know what the significance is of the line on top of the three digit number, I've taken a photo of another one on the same board. Length 3.2mm, width 2.5mm and the height is about 2.5mm which is significantly more than a smd resistor.

Any idea, thanks? 🙂
ataradov:
What does the silk screen say?

It looks like an inductor with 47 uH inductance.
Andrew2007:
Thanks very much ataradov, it does look like an inductor. 😉

3225 series (1210), the Panasonic one's have the same marking's too. 

No marking's on the silk screen.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod