Author Topic: Component identification -. 3 digit number with line over the top?  (Read 792 times)

0 Members and 1 Guest are viewing this topic.

Offline Andrew2007Topic starter

  • Newbie
  • Posts: 5
  • Country: gb
Hello

I've managed to cut through the cable of one of my CCTV camera's whilst trimming the ivy! 😩😲😠

There's a smd component on the main board that is broken on the end, at first I thought it was a resistor but I don't know what the significance is of the line on top of the three digit number, I've taken a photo of another one on the same board. Length 3.2mm, width 2.5mm and the height is about 2.5mm which is significantly more than a smd resistor.

Any idea, thanks? 🙂
 

Online ataradov

  • Super Contributor
  • ***
  • Posts: 11905
  • Country: us
    • Personal site
What does the silk screen say?

It looks like an inductor with 47 uH inductance.
Alex
 

Offline Andrew2007Topic starter

  • Newbie
  • Posts: 5
  • Country: gb
Thanks very much ataradov, it does look like an inductor. 😉

3225 series (1210), the Panasonic one's have the same marking's too. 

No marking's on the silk screen.
« Last Edit: May 16, 2019, 10:24:28 am by Andrew2007 »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf