Electronics > Beginners
Component identification -. 3 digit number with line over the top?
(1/1)
Andrew2007:
Hello
I've managed to cut through the cable of one of my CCTV camera's whilst trimming the ivy! 😩😲😠
There's a smd component on the main board that is broken on the end, at first I thought it was a resistor but I don't know what the significance is of the line on top of the three digit number, I've taken a photo of another one on the same board. Length 3.2mm, width 2.5mm and the height is about 2.5mm which is significantly more than a smd resistor.
Any idea, thanks? 🙂
ataradov:
What does the silk screen say?
It looks like an inductor with 47 uH inductance.
Andrew2007:
Thanks very much ataradov, it does look like an inductor. 😉
3225 series (1210), the Panasonic one's have the same marking's too.
No marking's on the silk screen.
Navigation
[0] Message Index
Go to full version