Author Topic: Connecting RF function gen to AF generator  (Read 1237 times)

0 Members and 1 Guest are viewing this topic.

Offline stevie3d

  • Newbie
  • Posts: 2
  • Country: us
Connecting RF function gen to AF generator
« on: March 25, 2017, 08:26:00 am »
I've got a BK Precision 4040A 20 MHz Sweep Function Generator I'm trying to get a 3 to 4mhz square wave RF carrier with a 500hz through 130khz AF modulated piggybacked signal on it with a 1 to 2 sec.sweep. I have an Separate AF gen if needed. Can I just hook the outputs in parallel, or do I need matching circuits, transformer, caps, coils, resistors. I also have a function gen. amplifier 40db. and an Audio amplifier for the AF generator. I'm just trying to not smoke my $1000 worth of equipment I just bought new to a crisp. I dropped out of electronics as we were getting into RF, carriers, the stuff I need now. Thanks for any help or literature you could point me to.  Steven Dixon   
 

Offline ebclr

  • Super Contributor
  • ***
  • Posts: 2199
  • Country: 00
Re: Connecting RF function gen to AF generator
« Reply #1 on: March 25, 2017, 09:00:17 am »
"3 to 4mhz square wave RF carrier"

Conceptual problem here

a 4 Mhz square wave, will have a lot of heavy harmonics, Rf carrier must be sinusoidal if you don't want to use all the rf spectrum for yourself.

If your rf generator does not have a input for modulation you will need
a modulator

something like  this

 

Online David Hess

  • Super Contributor
  • ***
  • Posts: 12101
  • Country: us
  • DavidH
Re: Connecting RF function gen to AF generator
« Reply #2 on: March 27, 2017, 12:42:26 am »
Set the 4040A to external AM modulation and apply the modulation signal to the modulation input.  Set the sweep limits and duration as required.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf