Author Topic: Connecting same voltage node  (Read 488 times)

0 Members and 1 Guest are viewing this topic.

Offline Vcky_electroTopic starter

  • Contributor
  • Posts: 23
  • Country: in
Connecting same voltage node
« on: September 28, 2019, 11:25:29 am »
Hi,
Im designing the regulator adaptor board for the camera board. Where camera board requires 700mA@3.3V. Host board having 3.3V and 1.2V supply. But host can support 300mA@3.3V. So I thought to boost the 1.2V to 3.3V and connect both 3.3V to the camera board. will it introduce any problem??

Thanks,
Vicky
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf