| Electronics > Beginners |
| connectors on a reclaimed BLDC |
| (1/1) |
| kenn:
So I scored this motor from an old garbage picked printer and I think it might work well for my paint can shaker-upper I am making however I am having trouble deciphering the pin out abbreviations and finding information about how to actually make use of this thing. the list goes as follows - I would like to use this but googling hasn't helped, I get tons of stuff for RC and using old CD-ROM motors in an Arduino but nothing for something like this, it's got a 44pin IC on it with no markings - if I knew what that was I could probably figure more out but all I have to go on is the pin labeling. Hopefully someone with some experience with motors like this could clue me in on how I might go about making use of it. I have included some images but let me know if I need to provide more information. 1: 24v 2: 24v 3: GND 4: GND 5: SGND (not sure what that means or what is does) 6: 5V 7: ST/SP (Again - what is this an abbreviation for) 8: RD (same - no idea) 9: CLK (I assume this stands for clock and this somehow needs a clk signal - not sure) 10: GAIN (not sure what that means / is needed for either) Thanks! |
| Navigation |
| Message Index |