| Electronics > Beginners |
| Control LED from Teensy uC |
| << < (4/4) |
| andrew_c:
--- Quote from: spec on November 19, 2018, 10:13:38 am ---Yes the PSMN1R1-30PL is a fantastic MOSFET. I was quite surprised how good it was. --- End quote --- Thank you so much for the detailed explanation. Of course the main attraction with that MOSFET was the RDS(ON) as I wanted the chip to stay cool. It appears to be driving the tiles quite nicely though I will take some measurements this afternoon and see how the voltage drop compares to the datasheet :) .. - --- Quote from: GeorgeOfTheJungle on November 19, 2018, 09:14:16 am ---Can also use an optocoupler. --- End quote --- .... okay that's simple .. just connected up a TCET1101 and it worked like a charm! :D Nothing to stop me doubling this up for each LED. |
| spec:
--- Quote from: andrew_c on November 19, 2018, 10:31:03 am --- --- Quote from: spec on November 19, 2018, 10:13:38 am ---Yes the PSMN1R1-30PL is a fantastic MOSFET. I was quite surprised how good it was. --- End quote --- Thank you so much for the detailed explanation. Of course the main attraction with that MOSFET was the RDS(ON) as I wanted the chip to stay cool. It appears to be driving the tiles quite nicely though I will take some measurements this afternoon and see how the voltage drop compares to the datasheet :) .. --- End quote --- No sweat :) You know what they say: 'Those that can do, and those that can't advise others' :palm: - |
| GeorgeOfTheJungle:
A Piher... those are good trimmers! :-+ |
| Navigation |
| Message Index |
| Previous page |