EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: taco on February 14, 2015, 05:00:14 pm

Title: D2059 question
Post by: taco on February 14, 2015, 05:00:14 pm
I've tried cross referencing this non and can't find a replacement. Any help? Or suggestions?

Thanks
Title: Re: D2059 question
Post by: Hideki on February 14, 2015, 05:21:29 pm
You left out the all important information about what package it is or what it looks like.

I guess it's a 2SD2059 NPN transistor? TO220F?
Title: Re: D2059 question
Post by: taco on February 14, 2015, 10:38:32 pm
Hope this helps. I'm a newbie at electronics so I'm assuming it's an NPN transistor. It fails the test procedure I viewed on the YouTube videos.
Title: Re: D2059 question
Post by: jlmoon on February 15, 2015, 02:56:52 am
All 2sa , 2sb transistors are PNP and all 2sC , 2sD series are NPN
2sC are generally lower power higher frequency while 2sD series are the slower work horses for power applications
Title: Re: D2059 question
Post by: taco on February 15, 2015, 10:13:13 pm
Thank you,
How do I find a replacement for this transistor since it's no longer available?
Title: Re: D2059 question
Post by: Rory on February 15, 2015, 10:17:22 pm
Thank you,
How do I find a replacement for this transistor since it's no longer available?
Easy enough:
https://www.google.com/search?q=2sd2059+substitute&oq=2sd2059+substitute (https://www.google.com/search?q=2sd2059+substitute&oq=2sd2059+substitute)
Title: Re: D2059 question
Post by: taco on February 16, 2015, 02:14:26 am
I found that substitute, but it says no longer available. It seems no one carries a substitute.
Title: Re: D2059 question
Post by: Rory on February 16, 2015, 02:37:25 am
Looking at the datasheet for the 2SD2059, it's a general purpose NPN power transistor in a TO220F case.

Looking at the NTE website an NTE-54 is their suggested match.
http://www.nteinc.com/ (http://www.nteinc.com/)

I found several sellers of 2SD2059 on eBay.






Title: Re: D2059 question
Post by: taco on February 16, 2015, 03:38:30 am
Thanks Rory