EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: thedoc298 on April 15, 2018, 12:17:44 am

Title: DC Offset
Post by: thedoc298 on April 15, 2018, 12:17:44 am

Does anyone know if it is possible to adj the dc offset of the FeelTech fy6600. What I mean, is the display is 113 mv off of what I set it to. If I set it to 0 volt offset it still outputs .113 volts dc. Need to calibrate the internals to match the screen.