« previous next »
Pages: [1]   Go Down

Author Topic: component adding problem in Eagle  (Read 1232 times)

0 Members and 1 Guest are viewing this topic.

Offline SavethedayTopic starter

  • Regular Contributor
  • *
  • Posts: 87
  • Country: 00
  • hobby technician
component adding problem in Eagle
« on: November 10, 2015, 02:19:06 am »
Hi everbody
I am trying to configure a new pcb schematic in Eagle 7.4 light but some components have 3 parts (showing underneath) I could able to add first 2. parts but 3. part with P 8 16 pins wouldn't add.How do we add that?
Thanks.
Logged
 

Offline liquibyte

  • Frequent Contributor
  • **
  • Posts: 475
  • Country: us
Re: component adding problem in Eagle
« Reply #1 on: November 10, 2015, 02:50:42 am »
Invoke on the context menu.
Logged
 

Offline tron9000

  • Frequent Contributor
  • **
  • Posts: 423
  • Country: gb
  • Still an Electronics Lab Tech
    • My Hack-a-day project page
Re: component adding problem in Eagle
« Reply #2 on: November 10, 2015, 09:04:09 am »
Press the Invoke button in the command bar on the left then click on the component. This will bring up the devices that still need to be placed in that package. Click on the PWR and place the pins where-ever.
Logged
Partsbox.io - orangise your parts!
"If you're green you can only ripen. If you're ripe you can only rot!"
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee