| Electronics > Beginners |
| driver to 12v LED strip??? |
| (1/1) |
| ddmeltzer8:
Hello! Im planning on installing some LEDs in my mothers kitchen. I already have the LED strips (5630).It will be about 3-4 m long. My question is what i should do for driver?How good r the cheap ones on ebay? Thanks in advance. |
| Zero999:
All that's needed is a 12V power supply. Buy a decent brand, from a reputable store. |
| Zero999:
You didn't specify how many Amps the LED strip needs. LED strip has built-in current limiting resistors, so requires a constant voltage supply. Choose a 12V power supply with an equal or higher current rating, than the LED strip requires. There's no need to worry about fire, so long as you use a decent branded power supply, with over-current protection and suitable cable for the current rating. |
| Navigation |
| Message Index |