| Electronics > Beginners |
| driving two LMZ14201 by using LM3880 with Mosfet |
| (1/1) |
| BeO:
Hello I need to drive two LMZ14201 in sequence I will try to test this schematic updated with two Mosfet to drive the EN pin and one p Chanel to put the EN pin to the ground P Mosfet will ground through a resistor to force LMZ14201 to 0 V output N Mosfet will power the EN pin to 5 V and vise versa following flag level ( flag is in 5 V ) can someone can give an advice on this schematic I will set one circuit per LMZ14201 Regards BeO |
| Navigation |
| Message Index |