Hello all,
I have a quick question about the Eakins Microscope Camera 48MP (
https://www.aliexpress.com/item/1005001915974422.html?spm=a2g0s.9042311.0.0.39a44c4dASbV8a)
The microscope came without a manual so I have a question.
Preface: Powering on with the DC 5V cable, the camera works normally (LED light is yellow).
After finishing my work I tried to turn the camera off by holding on to the "MENU" button (LED light goes to red)
The question is that I cannot turn it back on (from LED red to yellow), I have tried to hold on to the "MENU" button but it would not turn back on.
Possible solutions that I have thought of: unplug and replug the DC 5V to start the camera every time? or do people just leave the camera on all the time? or was the camera just faulty and it should turn back on (holding on the "MENU" button)?
Thanks for the help