Electronics > Beginners
Eprom 27c256 D0-D7 data waveform
(1/1)
Daxxin:
looking with scope at the data D0-7 i get this shape ..thats a valid data , garbage , freerunning , Z-state ?

bson:
Check where you attached the probe's ground clip... this looks a lot like you don't have a good signal reference.
T3sl4co1l:
Also, make sure probe is on 10x setting, and scope is >= 20MHz.

Tim
Ian.M:
... and that the x10 probe's compensation adjustment is set up correctly for the flattest possible tops/bottoms on the scope's test signal with no visible over/undershoot on the edges
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod