Electronics > Beginners
General Purpose P-Channel FET with reversed Source-Drain?
(1/1)
Arznei:
Hello everyone,

I ordered a few PCBs and beeing the dumb me that I am, I got source and drain mixed up on one FET.

So, I searched for a replacement, but I couldn't find _any_ P-Channel FET with the same package that had source and drain the other way around. For reference, I planned on using the SI2319DS-T1-E3 which comes in a SOT-23 package with G-S-D pinout. But to fix my PCB I would need a G-D-S pinout in a SOT-23 package.

The parameters to this FET are not critical at all. It should be able to handle up to 150mA current with Vgs at -3.3V.

So, does anyone know of a FET with that pinout and package? Do they even exist?

Thank you for any help!
magic:
I have only ever seen SOT23 (and any other SMD) transistors in one pinout, but I haven't seen more than a few dozen different types to be honest.
I'm afraid this pinout is kind of standard, after the mess that all the different TO92 pinouts were.

If it's not for a commercial product which needs to look pretty, you could perhaps mount this one transistor upside down.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod