Electronics > Beginners
General Purpose P-Channel FET with reversed Source-Drain?
(1/1)
Arznei:
Hello everyone,
I ordered a few PCBs and beeing the dumb me that I am, I got source and drain mixed up on one FET.
So, I searched for a replacement, but I couldn't find _any_ P-Channel FET with the same package that had source and drain the other way around. For reference, I planned on using the SI2319DS-T1-E3 which comes in a SOT-23 package with G-S-D pinout. But to fix my PCB I would need a G-D-S pinout in a SOT-23 package.
The parameters to this FET are not critical at all. It should be able to handle up to 150mA current with Vgs at -3.3V.
So, does anyone know of a FET with that pinout and package? Do they even exist?
Thank you for any help!
magic:
I have only ever seen SOT23 (and any other SMD) transistors in one pinout, but I haven't seen more than a few dozen different types to be honest.
I'm afraid this pinout is kind of standard, after the mess that all the different TO92 pinouts were.
If it's not for a commercial product which needs to look pretty, you could perhaps mount this one transistor upside down.
Navigation
[0] Message Index
Go to full version