Electronics > Beginners
Good soldering station + hot air for under 100€?
ArnauVF4:
--- Quote from: Howardlong on December 26, 2018, 09:22:20 am ---Although most of my soldering is done with Weller (ones with fuses!) I’ve had one of these rebadged under a different name for about eight or nine years. I still use it very regularly, particularly the hot air, for production rework. I estimate I’ve replaced around 1,500 QFNs with it. I haven’t ever had to change any elements. The iron takes Hakko bits.
https://www.amazon.co.uk/Rework-Soldering-Station-Solder-Nozzles/dp/B07GGDZCVG/ref=sr_1_1?ie=UTF8&qid=1545815717&sr=8-1&keywords=898d
--- End quote ---
That one exactly is not in amazon ES (spain) but the one in my original post is similar and it has good reviews, i know its not fancy or anything, but for me its enough i think
6PTsocket:
--- Quote from: ArnauVF4 on December 26, 2018, 12:51:59 pm ---
--- Quote from: Howardlong on December 26, 2018, 09:22:20 am ---Although most of my soldering is done with Weller (ones with fuses!) I’ve had one of these rebadged under a different name for about eight or nine years. I still use it very regularly, particularly the hot air, for production rework. I estimate I’ve replaced around 1,500 QFNs with it. I haven’t ever had to change any elements. The iron takes Hakko bits.
https://www.amazon.co.uk/Rework-Soldering-Station-Solder-Nozzles/dp/B07GGDZCVG/ref=sr_1_1?ie=UTF8&qid=1545815717&sr=8-1&keywords=898d
--- End quote ---
That one exactly is not in amazon ES (spain) but the one in my original post is similar and it has good reviews, i know its not fancy or anything, but for me its enough i think
--- End quote ---
Similar units are all over ebay. The main difference seems to be whether the heating element for the hot air is in the handle or in the cabinet.
Sent from my SM-G900V using Tapatalk
ocset:
I think the Aoyue 936 is the cheapest in the world of regulated temperature soldering irons....
https://www.pcb-soldering.co.uk/aoyue-936-soldering-station.html
Howardlong:
--- Quote from: ArnauVF4 on December 26, 2018, 12:51:59 pm ---
--- Quote from: Howardlong on December 26, 2018, 09:22:20 am ---Although most of my soldering is done with Weller (ones with fuses!) I’ve had one of these rebadged under a different name for about eight or nine years. I still use it very regularly, particularly the hot air, for production rework. I estimate I’ve replaced around 1,500 QFNs with it. I haven’t ever had to change any elements. The iron takes Hakko bits.
https://www.amazon.co.uk/Rework-Soldering-Station-Solder-Nozzles/dp/B07GGDZCVG/ref=sr_1_1?ie=UTF8&qid=1545815717&sr=8-1&keywords=898d
--- End quote ---
That one exactly is not in amazon ES (spain) but the one in my original post is similar and it has good reviews, i know its not fancy or anything, but for me its enough i think
--- End quote ---
Look for 898D. For example...
https://www.amazon.es/Soldadura-0IRHP100-03-Station-desoldadora-temperatura/dp/B07G81ZTMS/ref=sr_1_6?ie=UTF8&qid=1545849798&sr=8-6&keywords=898d
Check it comes with bits and nozzles, I think they all do but worth checking.
james_s:
My favorite is still the Hakko 936 but they were discontinued and there are a ton of inferior fakes out there. I haven't researched the topic lately since I already have an ancient but good Edsyn station but I'm sure there are lots of reviews out there.
Navigation
[0] Message Index
[*] Previous page
Go to full version