EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: Apollo1234 on October 15, 2024, 01:52:22 am

Title: Gpio in cpu2 TMS32F28379D
Post by: Apollo1234 on October 15, 2024, 01:52:22 am

Hi there,

I'm trying to use GPIO31 on CPU2 of the TMS320F28379D. I've set the ownership to CPU2 using GPACSEL4 = 1, but it's still not working. Can someone help me figure this out? it works if use only the cpu1, im also respecting the time line