Electronics > Beginners
Hello, please to which components does the signal cables of flow meter connect?
nyame:
Hello, please to which components does the signal cables of flow meter connect?
retrolefty:
Not enough information provided to determine a correct answer. Looks like there are 4 measurement loops available for more then just the flow measurement. A service/installation manual from the manufacture is essential to go further.
nyame:
thanks for the reply. the manual does not give that much information about the wiring. but as a beginner, i would like to understand if signal wirring is to be connect to components such as valves or actuators!
retrolefty:
--- Quote from: nyame on December 07, 2018, 02:28:37 pm ---thanks for the reply. the manual does not give that much information about the wiring. but as a beginner, i would like to understand if signal wiring is to be connect to components such as valves or actuators!
--- End quote ---
Typically field measurement loops wire to controller inputs while final control elements like valves or actuators wire to controller output loops. PLCs, DCS systems, or individual controller devices all work together for each specific process control objective. Its a specialty field and needs training/review of basic process control fundamentals to come before wiring up a system.
nyame:
i get you right, but i have interest in know the basics.
to the best of my understand i know those signal cables loops are 4 to 20mA that can be use to assess the measurement of the transmitter external.
please someone should guild me more if am on the right channel
Navigation
[0] Message Index
[#] Next page
Go to full version