Electronics > Beginners
HELP! I ruined my nintendo switch lcd connector
<< < (3/4) > >>
james_s:
If you can find a source for the connector, anyone with a hot air station and a little experience should be able to replace it easily. I don't recognize it offhand but I would guess it's something standard.
ArnauVF4:

--- Quote from: xyrtek on December 31, 2018, 07:09:09 pm ---Honestly the pic is a bit grainy, or at least that's how it shows on my screen.

If I had to take a guess that connector has pins on both sides.

It will be more evident when you look at it with a magnifying glass.

--- End quote ---
The flex connector, at least only has 1 side with pins. That side has "2 pins per 1" one in front and one behind
xyrtek:

--- Quote from: ArnauVF4 on December 31, 2018, 07:16:55 pm ---
--- Quote from: xyrtek on December 31, 2018, 07:09:09 pm ---Honestly the pic is a bit grainy, or at least that's how it shows on my screen.

If I had to take a guess that connector has pins on both sides.

It will be more evident when you look at it with a magnifying glass.

--- End quote ---
The flex connector, at least only has 1 side with pins. That side has "2 pins per 1" one in front and one behind

--- End quote ---

Yes, I can see that in the first video around 1:13, is not the same connector but the flex cable seems the same style.
ArnauVF4:
Here is the connector https://www.ebay.co.uk/itm/LCD-Screen-Socket-Connector-for-Nintendo-Switch-/292840655347
xyrtek:
She'll be alright, any ok cellphone repair shop can swap that connector out.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod