EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: TorqueRanger on October 20, 2012, 10:17:45 am

Title: Help with a build
Post by: TorqueRanger on October 20, 2012, 10:17:45 am

I am really trying to build my first circuit here and what to get some help and thoughts with this idea...




Here is my schematic so far... I am not sure on where I am going to install the input leads for the volt meter but would like so input... I can't do any auotcad or google sketch to show how it's going to look so far..
(http://i87.photobucket.com/albums/k133/nucklehead_2006/2.jpg)

Here is the video
Power Probe 3 Demo Video (https://www.youtube.com/watch?v=94npWntQY2g#)













Here is some of the part list
Digital Voltmeter mod
(http://image.pushauction.com/ViewPicture.aspx?Key=b9f3c2ef-9de2-4cbd-b693-f39dc9a1298c_f53dfb35-da9f-4e8f-8f8f-c86da27c7de1&H=191&W=250)
simple sche of logic probe (duel input led and 2 resitors)
project box
Rocker switch (spdt or dpdt )
I already have plenty of wire and connectors
resettable fuse

Title: Re: Help with a build
Post by: Jonny on October 25, 2012, 09:55:50 am

Connect it to the probe..... ?