EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: Nestor227 on January 15, 2023, 01:00:13 am

Title: Help with diy tube Pre amp pcb Design
Post by: Nestor227 on January 15, 2023, 01:00:13 am

Hi everyone , I'm trying to make a hi gain tube preamp for guitar , i've built a few turret board amps before but this time i decided to do a pcb based amp. I simplified the schematics so that it would be only  one channel i'm also making the B+ supply on a different board instead of having all together on one board. The idea is to put everything in a 1u Rack.
This is my first time making a board from scratch and i wanted to share it with you guys so that i could receive feedback from people with more experience than me in the subject. any help , tips or comments are greatly appreciated thanks.
 

Title: Re: Help with diy tube Pre amp pcb Design
Post by: jonpaul on January 15, 2023, 03:25:11 am

schematic? where's the valves?

jon