| Electronics > Beginners |
| HM10 (3.6-6V) on 3.3V power supply |
| (1/1) |
| lutkeveld:
I have no 5V source available, only a serial header with 3.3V power Would it be possible to run the HM10 on 3.3V? All boards on ebay seem to have an LDO on board, because the bare module works on 3.3V. If it is really necessary I guess the LDO can be bypassed. Can I run the HM-10 BT module on 3.3V without issues? |
| Navigation |
| Message Index |