Author Topic: HM10 (3.6-6V) on 3.3V power supply  (Read 829 times)

0 Members and 1 Guest are viewing this topic.

Offline lutkeveldTopic starter

  • Regular Contributor
  • *
  • Posts: 133
  • Country: nl
HM10 (3.6-6V) on 3.3V power supply
« on: January 08, 2019, 04:08:41 pm »
I have no 5V source available, only a serial header with 3.3V power
Would it be possible to run the HM10 on 3.3V?
All boards on ebay seem to have an LDO on board, because the bare module works on 3.3V.
If it is really necessary I guess the LDO can be bypassed.

Can I run the HM-10 BT module on 3.3V without issues?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf