EEVblog Electronics Community Forum
Electronics => Beginners => Topic started by: v.leon on June 12, 2017, 03:18:56 am
-
I am sorry,It's just a PCB Creating Tutorials …I'm trying to make some contribution.
But, in order to avoid any unnecessary troubles,I have delete them …
-
Please, stop spamming here. The article you stole can easily be found:
How to Create a Printed Circuit Board (PCB)
Department of Electrical & Computer Engineering
Michigan State University
Prepared by: John Kelley
Revision: 4/06/00
-
Please, stop spamming here. The article you stole can easily be found:
How to Create a Printed Circuit Board (PCB)
Department of Electrical & Computer Engineering
Michigan State University
Prepared by: John Kelley
Revision: 4/06/00
Jeez, holy spam. I thought it seemed kinda spammy, but wasn't sure...
-
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
If it still could not sharing,I will stop. :o
-
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
If it still could not sharing,I will stop. :o
You will be booted , pcb manufacturer (probably broker) in disguised ...
-
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
It is not unknown. You stole someone else work. Putting "unknown" does not solve the problem. I presume boards sent to you will go to someone else as well, since attribution is "unknown".
And yes, this was reported to moderators, so this garbage will be gone soon.
It would be nice if you could go too, since you have not contributed anything but spam. You are useless.
-
I am sorry,It's just a PCB Creating Tutorials …
I am new here, I'm trying to make some contribution.
-
I am new here, I'm trying to make some contribution.
Start with removing your ads from the signature. And then contribute your own work, don't steal other's.
Also, people here are intelligent enough to use google.
-
Yes I am working for a PCB factory,but I am also an electronics fan,especially PCB,I just want to share some articles which I collected many years ago.
I promise there is no any advertisement in the articles.
Just sharing.
-
Yes I am working for a PCB factory,but I am also a electronics fan,especially PCB,I just want to share some articles which I collected many years ago.
Again, we are not stupid, we know what you are doing. You are trying to make legitimately looking posts, while having your ads in the signature. You are not the first one to come up with that technique, and apparently not the smartest one either.
I promise there is no any advertisement in the articles.
Sure, why university prof. would put ads into his work? There are ads in your signature though. And that's all you want.
-
The link address in signature is my LinkedIn,but it has been deleted.
-
The link address in signature is my LinkedIn,but it has been deleted.
And this "Email: f.leopcb@hotmail.com or Sales9@multech-pcb.com"? Forum provides proper email functionality. And why anyone would want to email you, if you have 0 useful posts?
-
I will ameliorate all the questions you raised,but please be friendly.Thank you!
-
As others have said you are not the first and the game is clear. I'll hold of banning but it does not take long and even if you create lots of posts and leave a signature that can be removed.
-
what rule in this forum says you must talk alot or become a moderator before you can advertising in your signature? :palm: i dont think this will be a great offense to dave. most people like to take justice into their own hand luckily they are not one of our senate otherwise this country will collapse with alot of locked up citizen :palm: i dont see any offense if 1st time poster showing other people materials. he said sorry, dont you people have a sense of forgiveness? double :palm:
-
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
If it still could not sharing,I will stop. :o
You will be booted , pcb manufacturer (probably broker) in disguised ...
Yep, V.Leon works for a PCB company I won't bother to name and has created multiple accounts.
I'm sick of these PCB companies spamming on here, it is relentless.
-
what rule in this forum says you must talk alot or become a moderator before you can advertising in your signature? :palm: i dont think this will be a great offense to dave. most people like to take justice into their own hand luckily they are not one of our senate otherwise this country will collapse with alot of locked up citizen :palm: i dont see any offense if 1st time poster showing other people materials. he said sorry, dont you people have a sense of forgiveness? double :palm:
He has created multiple accounts and been banned before.
The number of PCB manufactures trying to spam this forum, either overtly or covertly is getting to a ridiculous number.
They are deliberately targeting the forum because of it's popularity with PCB related information, it's not just spam bots.