Author Topic: How to Create a Printed Circuit Board (PCB)  (Read 5151 times)

0 Members and 1 Guest are viewing this topic.

Offline v.leonTopic starter

  • Newbie
  • !
  • Posts: 6
  • Country: hk
    • Facebook
How to Create a Printed Circuit Board (PCB)
« on: June 12, 2017, 03:18:56 am »
I am sorry,It's just a PCB Creating Tutorials …I'm trying to make some contribution.
But, in order to avoid any unnecessary troubles,I have delete them …
« Last Edit: June 12, 2017, 04:06:44 am by v.leon »
In the future, everyone will be world-famous for 15 minutes.
 

Offline ataradov

  • Super Contributor
  • ***
  • Posts: 11228
  • Country: us
    • Personal site
Re: How to Create a Printed Circuit Board (PCB)
« Reply #1 on: June 12, 2017, 03:44:16 am »
Please, stop spamming here. The article you stole can easily be found:
Quote
How to Create a Printed Circuit Board (PCB)
Department of Electrical & Computer Engineering
Michigan State University
Prepared by: John Kelley
Revision: 4/06/00
Alex
 

Offline mdszy

  • Supporter
  • ****
  • Posts: 291
  • Country: us
  • somehow has an ee degree
    • szy.io
Re: How to Create a Printed Circuit Board (PCB)
« Reply #2 on: June 12, 2017, 03:47:28 am »
Please, stop spamming here. The article you stole can easily be found:
Quote
How to Create a Printed Circuit Board (PCB)
Department of Electrical & Computer Engineering
Michigan State University
Prepared by: John Kelley
Revision: 4/06/00

Jeez, holy spam. I thought it seemed kinda spammy, but wasn't sure...
somehow allowed to be a Pixie Wrangler in Training
eBay Store | My site | Hackaday.io Projects | my mastodon.technology profile
 

Offline v.leonTopic starter

  • Newbie
  • !
  • Posts: 6
  • Country: hk
    • Facebook
Re: How to Create a Printed Circuit Board (PCB)
« Reply #3 on: June 12, 2017, 03:52:25 am »
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
If it still could not sharing,I will stop.  :o
In the future, everyone will be world-famous for 15 minutes.
 

Offline BravoV

  • Super Contributor
  • ***
  • Posts: 7547
  • Country: 00
  • +++ ATH1
Re: How to Create a Printed Circuit Board (PCB)
« Reply #4 on: June 12, 2017, 03:53:19 am »
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
If it still could not sharing,I will stop.  :o

You will be booted , pcb manufacturer (probably broker) in disguised ...

Offline ataradov

  • Super Contributor
  • ***
  • Posts: 11228
  • Country: us
    • Personal site
Re: How to Create a Printed Circuit Board (PCB)
« Reply #5 on: June 12, 2017, 03:55:25 am »
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
It is not unknown. You stole someone else work. Putting "unknown" does not solve the problem. I presume boards sent to you will go to someone else as well, since attribution is "unknown".

And yes,  this was reported to moderators, so this garbage will be gone soon.

It would be nice if you could go too, since you have not contributed anything but spam. You are useless.
« Last Edit: June 12, 2017, 03:57:21 am by ataradov »
Alex
 

Offline v.leonTopic starter

  • Newbie
  • !
  • Posts: 6
  • Country: hk
    • Facebook
Re: How to Create a Printed Circuit Board (PCB)
« Reply #6 on: June 12, 2017, 03:59:08 am »
I am sorry,It's just a PCB Creating Tutorials …
I am new here, I'm trying to make some contribution.
In the future, everyone will be world-famous for 15 minutes.
 

Offline ataradov

  • Super Contributor
  • ***
  • Posts: 11228
  • Country: us
    • Personal site
Re: How to Create a Printed Circuit Board (PCB)
« Reply #7 on: June 12, 2017, 04:07:54 am »
I am new here, I'm trying to make some contribution.
Start with removing your ads from the signature. And then contribute your own work, don't steal other's.

Also, people here are intelligent enough to use google.
Alex
 

Offline v.leonTopic starter

  • Newbie
  • !
  • Posts: 6
  • Country: hk
    • Facebook
Re: How to Create a Printed Circuit Board (PCB)
« Reply #8 on: June 12, 2017, 04:14:57 am »
Yes I am working for a PCB factory,but I am also an electronics fan,especially PCB,I just want to share some articles which I collected many years ago.
I promise there is no any advertisement in the articles.
Just sharing.
« Last Edit: June 12, 2017, 04:16:56 am by v.leon »
In the future, everyone will be world-famous for 15 minutes.
 

Offline ataradov

  • Super Contributor
  • ***
  • Posts: 11228
  • Country: us
    • Personal site
Re: How to Create a Printed Circuit Board (PCB)
« Reply #9 on: June 12, 2017, 04:18:13 am »
Yes I am working for a PCB factory,but I am also a electronics fan,especially PCB,I just want to share some articles which I collected many years ago.
Again, we are not stupid, we know what you are doing.  You are trying to make legitimately looking posts, while having your ads in the signature. You are not the first one to come up with that technique, and apparently not the smartest one either.

I promise there is no any advertisement in the articles.
Sure, why university prof. would put ads into his work? There are ads in your signature though. And that's all you want.
Alex
 

Offline v.leonTopic starter

  • Newbie
  • !
  • Posts: 6
  • Country: hk
    • Facebook
Re: How to Create a Printed Circuit Board (PCB)
« Reply #10 on: June 12, 2017, 05:08:24 am »
The link address in signature is my LinkedIn,but it has been deleted.
In the future, everyone will be world-famous for 15 minutes.
 

Offline ataradov

  • Super Contributor
  • ***
  • Posts: 11228
  • Country: us
    • Personal site
Re: How to Create a Printed Circuit Board (PCB)
« Reply #11 on: June 12, 2017, 05:11:58 am »
The link address in signature is my LinkedIn,but it has been deleted.
And this "Email: f.leopcb@hotmail.com   or     Sales9@multech-pcb.com"? Forum provides proper email functionality. And why anyone would want to email you, if you have 0 useful posts?
Alex
 
The following users thanked this post: v.leon

Offline v.leonTopic starter

  • Newbie
  • !
  • Posts: 6
  • Country: hk
    • Facebook
Re: How to Create a Printed Circuit Board (PCB)
« Reply #12 on: June 12, 2017, 05:19:11 am »
I will ameliorate all the questions you raised,but please be friendly.Thank you!
In the future, everyone will be world-famous for 15 minutes.
 

Offline Simon

  • Global Moderator
  • *****
  • Posts: 17728
  • Country: gb
  • Did that just blow up? No? might work after all !!
    • Simon's Electronics
Re: How to Create a Printed Circuit Board (PCB)
« Reply #13 on: June 12, 2017, 07:24:31 am »
As others have said you are not the first and the game is clear. I'll hold of banning but it does not take long and even if you create lots of posts and leave a signature that can be removed.
 

Offline Mechatrommer

  • Super Contributor
  • ***
  • Posts: 11537
  • Country: my
  • reassessing directives...
Re: How to Create a Printed Circuit Board (PCB)
« Reply #14 on: June 12, 2017, 10:11:46 am »
what rule in this forum says you must talk alot or become a moderator before you can advertising in your signature? :palm: i dont think this will be a great offense to dave. most people like to take justice into their own hand luckily they are not one of our senate otherwise this country will collapse with alot of locked up citizen :palm: i dont see any offense if 1st time poster showing other people materials. he said sorry, dont you people have a sense of forgiveness? double :palm:
Nature: Evolution and the Illusion of Randomness (Stephen L. Talbott): Its now indisputable that... organisms “expertise” contextualizes its genome, and its nonsense to say that these powers are under the control of the genome being contextualized - Barbara McClintock
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37663
  • Country: au
    • EEVblog
Re: How to Create a Printed Circuit Board (PCB)
« Reply #15 on: June 12, 2017, 11:26:54 am »
Thanks for your reminding,but I have stated :sharing article, the attribution is unknow
If it still could not sharing,I will stop.  :o

You will be booted , pcb manufacturer (probably broker) in disguised ...

Yep, V.Leon works for a PCB company I won't bother to name and has created multiple accounts.

I'm sick of these PCB companies spamming on here, it is relentless.
 

Online EEVblog

  • Administrator
  • *****
  • Posts: 37663
  • Country: au
    • EEVblog
Re: How to Create a Printed Circuit Board (PCB)
« Reply #16 on: June 12, 2017, 11:30:43 am »
what rule in this forum says you must talk alot or become a moderator before you can advertising in your signature? :palm: i dont think this will be a great offense to dave. most people like to take justice into their own hand luckily they are not one of our senate otherwise this country will collapse with alot of locked up citizen :palm: i dont see any offense if 1st time poster showing other people materials. he said sorry, dont you people have a sense of forgiveness? double :palm:

He has created multiple accounts and been banned before.
The number of PCB manufactures trying to spam this forum, either overtly or covertly is getting to a ridiculous number.
They are deliberately targeting the forum because of it's popularity with PCB related information, it's not just spam bots.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf