| Electronics > Beginners |
| I looking for a component or a circuit that able to do loop like explain below |
| << < (2/2) |
| athtrya:
I think I want to be to generic in my explanation, so I will do my best to explain what is the problem, basically I have 4 independent thermostat with 2 output (1 for the heat mode and one for the cold mode) because the system can work for only one room at a time, I need to consider one thermostat at a time and ignore all the other, on the first thermostat in the list stop the system should go to the next thermostat. I hope this is more comprehensible. The electric diagram : https://docs.google.com/drawings/d/13cVFqC3f59bVOeFhP9_CU9sYCNWWfTaEBA5-BGjkcWk/edit?usp=sharing |
| Mechatrommer:
--- Quote from: athtrya on June 20, 2019, 09:31:55 am ---The diagram if this can Help https://docs.google.com/drawings/d/1hHYEHJ7nMK8Jk5SwAXiAzeT2Aa1DrbVbUVVygmKjdf4/edit?usp=sharing --- End quote --- 8 diodes and 1 or 2 resistors will be a good OR switch ymmv. |
| Benta:
A priority encoder might be easier than scanning. Check MC14532 from ON Semi. |
| athtrya:
--- Quote from: Benta on June 20, 2019, 06:54:25 pm ---A priority encoder might be easier than scanning. Check MC14532 from ON Semi. --- End quote --- Do it's the correct wiring : https://docs.google.com/drawings/d/1iNkgy5VQibc2iy2YiCYSBtnrbGuP8LWhJaEtB2nn6M8/edit?usp=sharing This seems logic to me but in the simplified diagram I take off all the PIN that aren't strictly use in the principle I have also ignore different voltage (but I know that I need the VDD and the VSS and I have to convert the voltage because all the contactor coil are in 220v) |
| athtrya:
I have add some new information in my previous post |
| Navigation |
| Message Index |
| Previous page |