Electronics > Beginners
ic config
(1/1)
Hornnumb2:
How do I know where pin one is on this, so I can replace. Thanks Michael
Hornnumb2:
Thanks I really could tell if that was a dot or not, yeah the chip I bought is already programmed. Michael
james_s:
It's also marked on the PCB silkscreen, the notch indicates the end with pin 1. With the chip right side up, pin 1 is always the bottom-left corner, most of the time the text is printed right side up on the IC however I have seen pictures of a few examples where this wasn't the case. Never personally encountered one though.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod