Electronics > Beginners
I'm pretty sure I already know the answer, but...
<< < (2/2)
tooki:

--- Quote from: GadgetBoy on October 17, 2018, 06:40:44 am ---Shouldn't ESD safe ceramic tweezers be non-conductive?

--- End quote ---
This is also why you’ll never find simultaneously ESD-safe and VDE insulated screwdrivers and pliers: the former is achieved by making the tools conductive, while the latter is extra-insulated!
Mechatrommer:

--- Quote from: ataradov on October 17, 2018, 06:57:37 am ---
--- Quote from: GadgetBoy on October 17, 2018, 06:46:50 am ---I thought the idea was to not conduct ESD from your body into your project. Like ceramic trim cap adjusters.

--- End quote ---
Nope. They need to dissipate the charge.

--- End quote ---
i thought the idea is to avoid being electrocuted when working on live circuit unintentionally. luckily i havent buy otherwise i'll get dissapointed before reading this thread. but well 200ohm is better than 0 ohm and possibly damaging some parts of my current metalic tweezer, i need to stay in focus.
tooki:
VDE insulated tools are for working on live circuits.
rsjsouza:

--- Quote from: GadgetBoy on October 17, 2018, 07:07:27 am ---Now that you say that, it makes sense. I was thinking the point of the ceramic tweezer tips was complete isolation from the circuit (like the screwdrivers).

--- End quote ---
Isolating materials accumulate static charges (paper, plastics, fabric, styrofoam) exactly due to this: the charges can't really flow away from the material's body.

However, 0\$\Omega\$ resistance can also be very damaging to devices - the charge flows too fast and creates high current surges that can damage the device. If you short your tweezers to ground and the device has a large charge buildup, you can damage it as the charges flow away from the device too fast. Although the 200\$\Omega\$ alone can help reduce this surge, it may be insufficient if the charge amounts hundreds or thousands of volts. That is why Ataradov mentioned the tweezers require the ESD strap as well, which has a typical resistance of 1M\$\Omega\$ so it can severely limit the surge of charges flowing away from the device.


--- Quote from: Mechatrommer on October 17, 2018, 07:56:52 am ---i thought the idea is to avoid being electrocuted when working on live circuit unintentionally. luckily i havent buy otherwise i'll get dissapointed before reading this thread. but well 200ohm is better than 0 ohm and possibly damaging some parts of my current metalic tweezer, i need to stay in focus.

--- End quote ---
The ESD strap and equipment cannot be used in high voltage installations.
BravoV:

--- Quote from: Mechatrommer on October 17, 2018, 07:56:52 am ---
--- Quote from: ataradov on October 17, 2018, 06:57:37 am ---
--- Quote from: GadgetBoy on October 17, 2018, 06:46:50 am ---I thought the idea was to not conduct ESD from your body into your project. Like ceramic trim cap adjusters.

--- End quote ---
Nope. They need to dissipate the charge.

--- End quote ---
i thought the idea is to avoid being electrocuted when working on live circuit unintentionally. luckily i havent buy otherwise i'll get dissapointed before reading this thread. but well 200ohm is better than 0 ohm and possibly damaging some parts of my current metalic tweezer, i need to stay in focus.

--- End quote ---

Any ESD for electronics protection related tools/equiments are NOT designed/made for protecting human life.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod