Electronics > Beginners
Is it possible to use low (safe) voltages to test high voltage equipment?
amyk:
--- Quote from: billbyrd1945 on December 02, 2018, 02:48:55 pm ---No, not testing old radios. Actually trouble shooting good PSU against dead PSU for modern Peltier wine cooler. Requires 110v and goes up to 150v or more on some components. I appreciate the difference in cumbersome and dead, but thought there might be a third choice. :-)
--- End quote ---
I wouldn't really consider that "high voltage", when I read your first post I was expecting something >1kV. Probe only with one hand, ensure that you are not touching anything else grounded. Remember you will only get shocked if a current is able to flow through you.
Navigation
[0] Message Index
[*] Previous page
Go to full version