Scaling off the low frequency gain from the plot I get about 31dB, which is a voltage gain of about x 36. The feedback resistor is effectively divided by (1+gain), giving an effective input resistance of about 37K. That's not quite consistent with your input impedance plot, but is no more than one pixel out, which could be rounding errors in the plot. Use a cursor and check both the gain and the input impedance properly!
You do make this hard on us by just posting screenshots, without even using measurement cursors on the waveforms. Next time if you want a quicker better answer attach the sim .asc file. If it needs any 3rd party symbols or libraries, zip them up with the asc file, so its ready to run. If it needs 3rd party models you have added to the LTspice standard model files, you need too identify them and place them as dot commands on the schematic.