| Electronics > Beginners |
| Issues with my first microscope |
| << < (3/7) > >> |
| Kfire778:
Thanks for your reply, but I'm thinking the Eakins is a clone of the amscope microscopes. |
| jfiresto:
--- Quote from: Kfire778 on April 01, 2019, 09:26:14 pm ---Well let me ask you this, by the time I get both eyes into focus, one eye piece ends up push out further than the other one thus preventing me from being able to fully center on the eyepieces thus having 2 images instead of one image of what's under the microscope.... --- End quote --- Even after you push the tubes toward each other horizontally? If that still won't fuse the images, the mirrors inside the eyepiece head (or they may be prisms) could have been knocked out of alignment. An adjustable eyepiece raises and lowers the eyepiece optics, with the same effect that the diopter adjustments on the eyepiece tubes raise or lower the entire eyepieces out of or into the tube. Could you post a picture of the head? |
| jfiresto:
--- Quote from: Kfire778 on April 01, 2019, 09:27:19 pm ---Thanks for your reply, but I'm thinking the Eakins is a clone of the amscope microscopes. --- End quote --- You may be ending the cloning chain too early. What microscope might Amscope have copied? :) |
| windsmurf:
--- Quote from: jfiresto on April 02, 2019, 08:38:24 am --- --- Quote from: Kfire778 on April 01, 2019, 09:27:19 pm ---Thanks for your reply, but I'm thinking the Eakins is a clone of the amscope microscopes. --- End quote --- You may be ending the cloning chain too early. What microscope might Amscope have copied? :) --- End quote --- ... or perhaps Amscope is made by the same factory in China. |
| Kfire778:
https://m.aliexpress.com/item/32851330647.html?pid=808_0000_0101&spm=a2g0n.search-amp.list.32851330647&aff_trace_key=2d978536a0cd43e2bb7fe15a9029781d-1549423025918-03508-UneMJZVf&aff_platform=msite&m_page_id=927amp-9oDNZhv64VUcF2lveC0HKA1551373348607 Unable to post pic but here's the link I purchased from. When I put both eye pieces to diopter point 0, I can look through both eye pieces an see one image,but after doing the parfocial adjustment the difference in eye pieces is so different I can no longer center, thus only seeing out of one eye at a time. |
| Navigation |
| Message Index |
| Next page |
| Previous page |