Electronics > Beginners
Issues with my first microscope
<< < (6/7) > >>
Kfire778:
OK I have some good news, an not so good news, a friend of mine had some eye pieces that were the same size as mine, except they were 10x/22, an these things are spot on.  He shook my left eye piece an something inside was bouncing up an down, not something I would have wanted to honestly do just because of how much csn go wrong, an how accident prone I am.  But right now I'm having absolutely no issues.
jfiresto:
Good job. One of my first tests is to pick up a piece of optics and gently shake it to see if anything rattles. I do this over a large tub, if it is, say, an old microscope, in case something falls out. (It has happened.)

If I got things right, the worst case scenario is that you may have to buy some new and better eyepieces? Did you see any vignetting with the 10X/22 ones?
Psi:
You can get a new pair of WF10X/20 on aliexpress for $21 inc shipping.
Lots of people selling them.

This store looks to sell a few types, check it out

https://www.aliexpress.com/item/One-Pair-WF10X-WF15X-WF20X-WF25X-WF30X-Eyepiece-For-Stereo-Microscope-Wide-Field-20mm-15mm-10mm/32897739739.html


Nusa:
Sounds like you have a complaint for wherever you bought the microscope from. Defective eyepiece, which should be replaced.
grizewald:
Great to hear that you've found the cause of the problem!
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod