Electronics > Beginners

Issues with my first microscope

<< < (6/7) > >>

Kfire778:
OK I have some good news, an not so good news, a friend of mine had some eye pieces that were the same size as mine, except they were 10x/22, an these things are spot on.  He shook my left eye piece an something inside was bouncing up an down, not something I would have wanted to honestly do just because of how much csn go wrong, an how accident prone I am.  But right now I'm having absolutely no issues.

jfiresto:
Good job. One of my first tests is to pick up a piece of optics and gently shake it to see if anything rattles. I do this over a large tub, if it is, say, an old microscope, in case something falls out. (It has happened.)

If I got things right, the worst case scenario is that you may have to buy some new and better eyepieces? Did you see any vignetting with the 10X/22 ones?

Psi:
You can get a new pair of WF10X/20 on aliexpress for $21 inc shipping.
Lots of people selling them.

This store looks to sell a few types, check it out

https://www.aliexpress.com/item/One-Pair-WF10X-WF15X-WF20X-WF25X-WF30X-Eyepiece-For-Stereo-Microscope-Wide-Field-20mm-15mm-10mm/32897739739.html


Nusa:
Sounds like you have a complaint for wherever you bought the microscope from. Defective eyepiece, which should be replaced.

grizewald:
Great to hear that you've found the cause of the problem!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod