Electronics > Beginners
Lab lights, how much are you happy with lights in your lab
<< < (5/7) > >>
sairfan1:
can you please share some link what kind of those one, (As there are a lot of led strips now a days I'm not taking risk that i buy some different with poor result)
do they get hot with time?

thanks,
Psi:
i have 2x 50W  95%CRI YUJI leds in my smallish lab.

Plenty of light and good quality light too.


If you think 100W of light is overkill for a small lab, you're wrong.
This would be overkill
https://store.yujiintl.com/collections/frontpage/products/yujileds-bc-series-high-cri-cob-led-900h-1500w-pack-1pcs
floobydust:

--- Quote from: Psi on May 14, 2019, 02:44:10 pm ---i have 2x 50W  95%CRI YUJI leds in my smallish lab.

--- End quote ---

What format bulb are you using? Are you using just their high CRI emitters on your own heatsink etc.? The Yuji LED's phosphors appear much better.
I'm a bit tired of pissing around with 10W-50W LED's mounting them on a heatsink, adding lens etc. and trying to beat an Ikea desk lamp  :palm:
Yuji wants $499 USD for a desk lamp.

I've been trying GU10's with E17 adapters and such. But the GU10 is so narrow beam, it's like a flashlight.
Something that could mount on 2020 hardware would be great for making LED lighting.
Psi:

--- Quote from: floobydust on May 16, 2019, 04:54:27 am ---
--- Quote from: Psi on May 14, 2019, 02:44:10 pm ---i have 2x 50W  95%CRI YUJI leds in my smallish lab.

--- End quote ---

What format bulb are you using? Are you using just their high CRI emitters on your own heatsink etc.? The Yuji LED's phosphors appear much better.
I'm a bit tired of pissing around with 10W-50W LED's mounting them on a heatsink, adding lens etc. and trying to beat an Ikea desk lamp  :palm:
Yuji wants $499 USD for a desk lamp.

I've been trying GU10's with E17 adapters and such. But the GU10 is so narrow beam, it's like a flashlight.
Something that could mount on 2020 hardware would be great for making LED lighting.

--- End quote ---

yep, just two 50W cob emitter on a large heatsink and slow speed fan. I have a 30cm x 30cm diffuser sheet mounted over it to make it look a bit better and prevent it casting hard shadows.
Housedad:
My lab is in my basement.  There already were six fixtures with (4) cool white t-12 bulbs each, and I added six 4 ft daylight t-8 2 bulb shop lights over the benches. 

I really like the effect even though my wife says that if I add any more the house will start to fly from the photon pressures. 😎
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod