| Electronics > Beginners |
| LCD portable dvd player screen hack? |
| (1/1) |
| sparkzap:
i have a few old portable dvd screens, but there is no input there are few videos youtube but lacking details. how hard would it be to make a VGA\hdmi input hack (not composite) or something universal for these screens? and yes i know i can get a used pc screen for $20 on ebay. has anyone tried this? https://www.ebay.com.au/itm/LCD-Controller-Board-MT561-B-Driver-LVDS-LCD-Screen-to-LCD-Monitor-DIY-Kit/172600011385 |
| mariush:
best bet would be to open them up and figure out the panel verision and connection type then go from there. Your LCD panel is most likely 720x480 or 800x600... if you're lucky it may be 1024x768 .... you'll then need to find compatible lvds board. Also if those are old they may have cfl tubes instead of leds so you'd also need separate inverter or you'll need to hack the backlight. |
| sparkzap:
hello i have opened it its a lcd panel no cfl with the flat wire maybe ill upload photos |
| Navigation |
| Message Index |