EEVblog Electronics Community Forum

Electronics => Beginners => Topic started by: desperate on August 24, 2022, 08:53:40 am

Title: Looking for a connector (see picture)
Post by: desperate on August 24, 2022, 08:53:40 am

I'm looking to source a connector.  It is 9/16 wide, 3/16 tall, 4 pin.  Sort of looks like a PC board edge connector, it would grip both sides of the PC board.  Note the top right connector is missing a small piece of plastic that the other three have... but it should be there, it broke off. Doesn't affect the function (so far).
Note the top corners are beveled, otherwise it would be rectangular.

This particular one, and my primary use is for a power connector for a ResMed AirSense 11 CPAP machine.  Only the outer two pins are actually in use. But I think I've seen connectors like this in other situations, I can't remember where, though!

[attachimg=1]

Title: Re: Looking for a connector (see picture)
Post by: Terry Bites on August 24, 2022, 11:18:50 am

Whats it from?

Title: Re: Looking for a connector (see picture)
Post by: Brumby on August 24, 2022, 12:56:54 pm

I feel I have seen that somewhere - but for the life of me, I just can't place it.

Title: Re: Looking for a connector (see picture)
Post by: pcprogrammer on August 24, 2022, 01:00:09 pm

At first I thought firewire, but that only has three pins per side.

Title: Re: Looking for a connector (see picture)
Post by: CaptDon on August 24, 2022, 01:33:45 pm

Is that a shielded gigabit cable?

Title: Re: Looking for a connector (see picture)
Post by: desperate on August 24, 2022, 05:28:27 pm

I'll add this to the posting... it's a power connector for a ResMed AirSense 11 CPAP machine.  Only the outer two pins are actually in use.