Author Topic: Looking for a SMD version of a JST VH 3.96  (Read 399 times)

0 Members and 1 Guest are viewing this topic.

Offline sschuellerTopic starter

  • Newbie
  • Posts: 1
  • Country: ch
    • My Blog
Looking for a SMD version of a JST VH 3.96
« on: November 26, 2023, 12:30:59 pm »
Hi everyone,

I am looking for a SMD equivalent of a JST VH 3.96 like this one:



I need 6 pin.

Does anyone know where I can get them or what i need to search for? I know they do exist as I have LED panels with SMD versions of this connector but it probably has a different name.

I first thought the LED panels I have just use the right angle version soldered to the PCB but this is not the case. The plastic on the SMD version touches the PCB which would not be the case if I soldered the right angle version to a PCB.

Closest I found is: https://www.lcsc.com/product-detail/Wire-To-Board-Wire-To-Wire-Connector_Megastar-ZX-VH3-96-6PLT_C7429654.html but that doesn't fit.

Thank in advance.
 

Offline findAround

  • Contributor
  • Posts: 11
  • Country: au
Re: Looking for a SMD version of a JST VH 3.96
« Reply #1 on: April 24, 2024, 05:13:31 am »
Did you have any luck finding this connector? I'm looking for a similar one.
 

Offline Smokey

  • Super Contributor
  • ***
  • Posts: 2609
  • Country: us
  • Not An Expert
Re: Looking for a SMD version of a JST VH 3.96
« Reply #2 on: April 24, 2024, 05:19:07 am »
I think this is the right pitch. 
https://www.digikey.com/en/products/detail/gct/BH010-06-C-0850-0840-0573-G/12819978

You don't get the locking tab, but you could glue the thing in place and it would probably work.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf