| Electronics > Beginners |
| Looking for Connectors |
| (1/1) |
| gudenau:
I was trying to find some connectors on a board that I have so I could make a replacement. I was unable to find some of them, plus I would like to know if the few I did "find" are correct. I would also like some tips for trying to find this stuff out myself, as I am fairly new to finding existing parts without labels. (Also sorry for the bad pictures, the camera app on my phone is not great. No focus control) 6x2 pins 2mm pitch 14mm wide 5mm tall Square pins .5mm large Seems to be compatible with 455-1763-ND. Flat flex 22 contacts 1mm pitch 27mm wide 4mm tall >1mm x ~4mm contacts Seems to be compatible with WM11062TR-ND. Flat flex 16 contacts 1mm pitch 21mm wide 4mm tall >1mm x ~4mm contacts Seems to be compatible with WM3391TR-ND. 2x1 pins 2mm pitch 6mm wide 5mm tall Square pins .5mm large 3x1 pins 2mm pitch 8mm wide 5mm tall Square pins .5mm large 4x1 pins 2mm pitch 10mm wide 5mm tall Square pins .5mm large Note, that is factory gunk. 6x1 pins 2mm pitch 14mm wide 5mm tall Square pins .5mm large Flat flex with notch 51 positions Flat flex goes in the side with the hinge .5mm pitch 36mm wide >.5mm x 4mm contacts 1x1mm2 notch 1mm from bottom on both sides |
| Monkeh:
I'm not familiar with flat flex types so I'll skip those. The others appear to be JST PHD and PH type, although the materials and markings seem a little off. It seems that Sullins, TE, and Molex have cloned them. Markings and the identity of the other parts seem to suggest the Molex parts. |
| pigrew:
I don't know for sure, but by browsing Digikey the first one looks most similar to a Sullins SWR204-NRTN-D06-ST-GA. The 2-pin one should be SWR201-NRTN-S02-SA-WH. 3 pin is SWR201-NRTN-S03-SA-WH. Etc... Maybe? |
| Jwillis:
The ribbon ones are FFC/FPC (Flexible Flat Cable)/(Flexible Printed Circuit) connector |
| Navigation |
| Message Index |