Author Topic: Lorton cap ck w/Siglent 1052, pictures and video  (Read 907 times)

0 Members and 1 Guest are viewing this topic.

Offline billbyrd1945Topic starter

  • Regular Contributor
  • *
  • Posts: 203
  • Country: us
Lorton cap ck w/Siglent 1052, pictures and video
« on: November 28, 2018, 10:49:58 pm »
Wanted to see if my super cheap signal generator and my Siglent SDS1052DL+ would suffice to do the o'scope cap check featured in this video:



I was able to get a nice waveform but couldn't get the math to work out. I have no problem whatsoever in accepting that I simply can't deal with that many zeros and conversions. If you'd like to try, here's the setup I used if you'd like to give it a try: Hertz jumper: max; all knobs centered; resistor: 22k; cap: 4.7uF. Images attached.
« Last Edit: November 28, 2018, 11:01:20 pm by billbyrd1945 »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf