| Electronics > Beginners |
| Make an audible sound |
| (1/2) > >> |
| sussertown:
I have a bandsaw in my workshop. I forget to turn it off and it damages blades and machinery. I wired the lamp to the bandsaw switch so the light would stay on. but the ambient light in the room and the direction of the lamp if turned away causes me to miss it when I walk out of the shop. I thought it may be smart to wire a sound producing instrument to the machine instead. But one that is not obnoxious. Does anyone have a simple idea? |
| grifftech:
dust collector |
| Brumby:
--- Quote from: sussertown on August 30, 2018, 02:14:57 pm ---I have a bandsaw in my workshop. I forget to turn it off ... --- End quote --- Sorry ... I couldn't get past this. If I use a bandsaw it gets turned on just before I start cutting and it gets turned off before I walk away. |
| mikerj:
--- Quote from: Brumby on August 30, 2018, 03:26:21 pm --- --- Quote from: sussertown on August 30, 2018, 02:14:57 pm ---I have a bandsaw in my workshop. I forget to turn it off ... --- End quote --- Sorry ... I couldn't get past this. If I use a bandsaw it gets turned on just before I start cutting and it gets turned off before I walk away. --- End quote --- Indeed. It must be the quietest bandsaw in existence if it needs an additional noise maker to show it's on. I have to wonder if the OP is talking about a very different machine to the one we are thinking of? |
| Bassman59:
--- Quote from: sussertown on August 30, 2018, 02:14:57 pm ---I have a bandsaw in my workshop. I forget to turn it off and it damages blades and machinery. --- End quote --- If you are the sort that forgets to turn off a bandsaw, you shouldn't be allowed anywhere near a bandsaw. |
| Navigation |
| Message Index |
| Next page |